Spinner, N. et al. Novel 18650 lithium-ion battery surrogate cell design with anisotropic thermophysical properties for studying failure events. J. Power Sources 312, 1–11 (2016).
Google Scholar
Yu, X. et al. Simultaneous operando measurements of the local temperature, state of charge, and strain inside a commercial lithium-ion battery pouch cell. J. Electrochem. Soc. 165, A1578 (2018).
Google Scholar
Kok, M. et al. Virtual unrolling of spirally-wound lithium-ion cells for correlative degradation studies and predictive fault detection. Sustainable Energy Fuels 3, 2972–2976 (2019).
Google Scholar
Ziesche, R. F. et al. 4D imaging of lithium-batteries using correlative neutron and X-ray tomography with a virtual unrolling technique. Nat. Commun. 11, 777 (2020).
Google Scholar
Sripad, S., Bills, A. & Viswanathan, V. A review of safety considerations for batteries in aircraft with electric propulsion. MRS Bull. 46, 435–442 (2021).
Google Scholar
Li, M. et al. Fast charging lithium-ion batteries for a new era of electric vehicles. Cell Rep. Phys. Sci. 1, 100212 (2020).
Google Scholar
Tomaszewska, A. et al. Lithium-ion battery fast charging: a review. eTransportation 1, 100011 (2019).
Google Scholar
Griffith, K. J. et al. Niobium tungsten oxides for high-rate lithium-ion energy storage. Nature 559, 556–563 (2018).
Google Scholar
Billaud, J. et al. Magnetically aligned graphite electrodes for high-rate performance lithium-ion batteries. Nat. Energy 1, 16097 (2016).
Google Scholar
Lain, M. & Kendrick, E. Understanding the limitations of lithium ion batteries at high rates. J. Power Sources 493, 229690 (2021).
Google Scholar
Ma, S. et al. Temperature effect and thermal impact in lithium-ion batteries: a review. Progr. Nat. Sci. Mater. Inter. 28, 653–666 (2018).
Google Scholar
Finegan, D. et al. Tracking internal temperature and structural dynamics during nail penetration of lithium-ion cells. J. Electrochem. Soc. 164, A3285 (2017).
Google Scholar
Han, A. et al. Effect of humidity on properties of lithium-ion batteries. Int. J. Electrochem. Sci. 16, 210554 (2021).
Google Scholar
Hagart-Alexander, C. in Instrumentation Reference Book 4th edn (ed. Boyes, W.) Ch. 21, 269–326 (Elsevier, 2010).
Houx, J. L. & Kramer, D. X-ray tomography for lithium ion battery electrode characterisation—a review. Energy Rep. 7, 9–14 (2021).
Google Scholar
Petz, D. et al. Lithium distribution and transfer in high-power 18650-type lithium-ion cells at multiple length scales. Energy Storage Mater. 41, 546–553 (2021).
Google Scholar
Xu, C. et al. Future material demand for automotive lithium-based batteries. Commun. Mater. 1, 99 (2020).
Ding, Y. et al. Automotive lithium-ion batteries: current status and future perspectives. Electrochem. Energ. Rev. 2, 1–28 (2019).
Google Scholar
Heenan, T. et al. Identifying the origins of microstructural defects such as cracking within Ni-rich NMC811 cathode particles for lithium-ion batteries. Adv. Energy Mater. 10, 2002655 (2020).
Google Scholar
Finegan, D. et al. Spatially resolving lithiation in silicon–graphite composite electrodes via in situ high-energy X-ray diffraction computed tomography. Nano Lett. 19, 3811–3820 (2019).
Google Scholar
Maleki, H. et al. Thermal properties of lithium-ion battery components. J. Electrochem. Soc. 146, 947 (1999).
Google Scholar
Tranter, T. et al. Communication—prediction of thermal issues for larger format 4680 cylindrical cells and their mitigation with enhanced current collection. J. Electrochem. Soc. 167, 160544 (2020).
Google Scholar
Offer, G. et al. Cool metric for lithium-ion batteries could spur progress. Nature 582, 485–487 (2020).
Google Scholar
Heenan, T. M. M. et al. Data for an advanced microstructural and electrochemical datasheet on 18650 Li-ion batteries with nickel-rich NMC811 cathodes and graphite-silicon anodes. Data Brief. 32, 106033 (2020).
Google Scholar
Vaughan, G. B. M. et al. ID15A at the ESRF—a beamline for high speed operando X-ray diffraction, diffraction tomography and total scattering. J. Appl. Cryst. 27, 515–528 (2020).
Google Scholar
Yaoita, K. et al. Angle-dispersive diffraction measurement system for high-pressure experiments using a multichannel collimator. Rev. Sci. Instrum. 68, 2106–2110 (1997)
Morad, G. et al. High efficiency multichannel collimator for structural studies of liquids and low-Z materials at high pressures and temperatures. Rev. Sci. Instrum. 82, 023904 (2011).
Google Scholar
Ashiotis, G. et al. The fast azimuthal integration Python library: PyFAI. J. Appl. Cryst. 48, 510–519 (2015).
Google Scholar
Coelho, A. TOPAS and TOPAS-Academic: an optimization program integrating computer algebra and crystallographic objects written in C++. J. Appl. Cryst. 51, 210–218 (2018).
Google Scholar
Finegan, D. et al. Spatial dynamics of lithiation and lithium plating during high-rate operation of graphite electrodes. Energy Environ. Sci. 13, 2570–2584 (2020).
Google Scholar